What it is
ESP32-C3 hot wire cutter temp sensor. MAX6675 K-type probe + OLED + WiFi dashboard.
Version history
Straight from the project’s own card data — what each version added.
Breadboard + OLED.
WiFi AP dashboard.
°C/°F, graph, buzzer, targets.
What broke, and what I’d change
Not written yet. This is the part only I can write — what actually went wrong, and what I’d do differently. It lives in builds/reflections/clip-thermometer.md (see _TEMPLATE.md); as soon as that file has words in it, this section fills in on the next build.
Everything else on this page — the spec, the version history, the file counts — is generated from the project’s own build notes and files, so nothing here is guesswork.
Build spec
The project’s own build notes, rendered. Open the raw .md ↗
⚠️ This project’s spec file is a stub — only its title, category and status were ever recorded, so there is no build detail to show. Nothing has been filled in to pad it out.
Show the spec
Clip-On Thermometer
Category: Hardware & Electronics · Status: Done
ESP32-C3 hot wire cutter temp sensor. MAX6675 K-type probe + OLED + WiFi dashboard.
Stack / Tools: ESP32-C3, Sensor, PlatformIO, MAX6675, OLED, WiFi
Build path:
- V1 — Breadboard + OLED.
- V2 — WiFi AP dashboard.
- V3 — °C/°F, graph, buzzer, targets.
Location: ~/projects/clip-thermometer/
Full spec already in this prompt file (ESP32-C3 + MAX6675 + OLED hot-wire-cutter temp sensor).