{
    "type": "machine",
    "name": "Bambu Lab P2S 0.4 nozzle",
    "inherits": "fdm_bbl_3dp_001_common",
    "from": "system",
    "setting_id": "GM049",
    "instantiation": "true",
    "nozzle_diameter": [
        "0.4"
    ],
    "printer_model": "Bambu Lab P2S",
    "printer_variant": "0.4",
    "bed_exclude_area": [],
    "default_filament_profile": [
        "Bambu PLA Basic @BBL P2S"
    ],
    "default_print_profile": "0.20mm Standard @BBL P2S",
    "deretraction_speed": [
        "30",
        "30"
    ],
    "deretract_speed_extruder_change": [
        "30",
        "30"
    ],
    "enable_long_retraction_when_cut": "2",
    "extruder_clearance_dist_to_rod": "36.5",
    "extruder_clearance_height_to_lid": "141.5",
    "extruder_clearance_height_to_rod": "32.5",
    "extruder_clearance_max_radius": "72",
    "extruder_clearance_radius": "72",
    "extruder_offset": [
        "0X0"
    ],
    "extruder_variant_list": [
        "Direct Drive Standard,Direct Drive High Flow"
    ],
    "fan_direction": "right",
    "hotend_cooling_rate": [
        "2",
        "2"
    ],
    "hotend_heating_rate": [
        "2",
        "2"
    ],
    "include": [
        "Bambu Lab P2S 0.4 nozzle template machine_start_gcode",
        "Bambu Lab P2S 0.4 nozzle template machine_end_gcode",
        "Bambu Lab P2S 0.4 nozzle template layer_change_gcode",
        "Bambu Lab P2S 0.4 nozzle template time_lapse_gcode",
        "Bambu Lab P2S 0.4 nozzle template wrapping_detection_gcode",
        "Bambu Lab P2S 0.4 nozzle template change_filament_gcode"
    ],
    "long_retractions_when_cut": [
        "0",
        "0"
    ],
    "machine_load_filament_time": "26",
    "machine_max_acceleration_travel": [
        "10000",
        "10000",
        "10000",
        "10000"
    ],
    "machine_max_speed_x": [
        "600",
        "600",
        "600",
        "600"
    ],
    "machine_max_speed_y": [
        "600",
        "600",
        "600",
        "600"
    ],
    "machine_prepare_compensation_time": "370",
    "machine_unload_filament_time": "31",
    "machine_max_acceleration_e": [
        "5000",
        "5000",
        "5000",
        "5000"
    ],
    "machine_max_acceleration_extruding": [
        "20000",
        "20000",
        "20000",
        "20000"
    ],
    "machine_max_acceleration_retracting": [
        "5000",
        "5000",
        "5000",
        "5000"
    ],
    "machine_max_acceleration_x": [
        "20000",
        "20000",
        "20000",
        "20000"
    ],
    "machine_max_acceleration_y": [
        "20000",
        "20000",
        "20000",
        "20000"
    ],
    "machine_max_acceleration_z": [
        "500",
        "200",
        "200",
        "200"
    ],
    "machine_max_jerk_e": [
        "2.5",
        "2.5",
        "2.5",
        "2.5"
    ],
    "machine_max_jerk_x": [
        "9",
        "9",
        "9",
        "9"
    ],
    "machine_max_jerk_y": [
        "9",
        "9",
        "9",
        "9"
    ],
    "machine_max_jerk_z": [
        "3",
        "3",
        "3",
        "3"
    ],
    "machine_max_speed_e": [
        "30",
        "30",
        "30",
        "30"
    ],
    "machine_max_speed_z": [
        "20",
        "20",
        "20",
        "20"
    ],
    "machine_min_extruding_rate": [
        "0"
    ],
    "machine_min_travel_rate": [
        "0"
    ],
    "nozzle_height": "4.2",
    "nozzle_volume": [
        "110",
        "110"
    ],
    "nozzle_type": [
        "hardened_steel",
        "hardened_steel"
    ],
    "nozzle_flush_dataset": [
        "0",
        "0"
    ],
    "printable_height": "256",
    "printer_extruder_id": [
        "1",
        "1"
    ],
    "printer_extruder_variant": [
        "Direct Drive Standard",
        "Direct Drive High Flow"
    ],
    "retract_before_wipe": [
        "0%",
        "0%"
    ],
    "retract_length_toolchange": [
        "2",
        "2"
    ],
    "retract_lift_above": [
        "0",
        "0"
    ],
    "retract_lift_below": [
        "249",
        "249"
    ],
    "retraction_length": [
        "0.8",
        "0.8"
    ],
    "retraction_minimum_travel": [
        "1",
        "1"
    ],
    "retraction_speed": [
        "30",
        "30"
    ],
    "retract_restart_extra": [
        "0",
        "0"
    ],
    "retract_restart_extra_toolchange": [
        "0",
        "0"
    ],
    "retract_when_changing_layer": [
        "1",
        "1"
    ],
    "retraction_distances_when_cut": [
        "18",
        "18"
    ],
    "support_object_skip_flush": "1",
    "wipe_distance": [
        "2",
        "2"
    ],
    "wipe": [
        "1",
        "1"
    ],
    "wrapping_exclude_area": [
        "153x256",
        "216x256",
        "216x235",
        "153x235"
    ],
    "z_hop": [
        "0.4",
        "0.4"
    ],
    "z_hop_types": [
        "Auto Lift",
        "Auto Lift"
    ],
    "upward_compatible_machine": [
        "Bambu Lab A1 0.4 nozzle",
        "Bambu Lab H2S 0.4 nozzle",
        "Bambu Lab H2D 0.4 nozzle",
        "Bambu Lab H2D Pro 0.4 nozzle",
        "Bambu Lab H2C 0.4 nozzle"
    ]
}