{
    "type": "machine",
    "name": "Bambu Lab H2C 0.4 nozzle",
    "inherits": "fdm_bbl_3dp_002_common",
    "from": "system",
    "setting_id": "GM041",
    "instantiation": "true",
    "nozzle_diameter": [
        "0.4",
        "0.4"
    ],
    "printer_model": "Bambu Lab H2C",
    "printer_variant": "0.4",
    "default_filament_profile": [
        "Bambu PLA Basic @BBL H2C"
    ],
    "default_print_profile": "0.20mm Standard @BBL H2C",
    "enable_long_retraction_when_cut": [
        "2"
    ],
    "enable_pre_heating": "1",
    "extruder_clearance_dist_to_rod": "50",
    "extruder_clearance_height_to_lid": "201",
    "extruder_clearance_height_to_rod": "47.4",
    "extruder_clearance_max_radius": "96",
    "extruder_clearance_radius": "49",
    "extruder_height_gap": "5",
    "extruder_printable_area": [
        "0x0,325x0,325x320,0x320",
        "25x0,330x0,330x320,25x320"
    ],
    "extruder_max_nozzle_count": [
        "1",
        "6"
    ],
    "fan_direction": "left",
    "hotend_cooling_rate": [
        "1.6",
        "1.6",
        "3.4",
        "3.4"
    ],
    "hotend_heating_rate": [
        "3.5",
        "3.5",
        "13.3",
        "13.3"
    ],
    "include": [
        "Bambu Lab H2C 0.4 nozzle template machine_start_gcode",
        "Bambu Lab H2C 0.4 nozzle template machine_end_gcode",
        "Bambu Lab H2C 0.4 nozzle template time_lapse_gcode",
        "Bambu Lab H2C 0.4 nozzle template wrapping_detection_gcode",
        "Bambu Lab H2C 0.4 nozzle template change_filament_gcode",
        "Bambu Lab H2C 0.4 nozzle template layer_change_gcode"
    ],
    "long_retractions_when_cut": [
        "1",
        "1",
        "1",
        "1"
    ],
    "machine_load_filament_time": "15",
    "machine_max_speed_x": [
        "1000",
        "1000",
        "1000",
        "1000",
        "1000",
        "1000",
        "1000",
        "1000"
    ],
    "machine_max_speed_y": [
        "1000",
        "1000",
        "1000",
        "1000",
        "1000",
        "1000",
        "1000",
        "1000"
    ],
    "machine_max_speed_z": [
        "30",
        "30",
        "30",
        "30",
        "30",
        "30",
        "30",
        "30"
    ],
    "machine_unload_filament_time": "15",
    "machine_max_speed_e": [
        "50",
        "50",
        "50",
        "50",
        "50",
        "50",
        "50",
        "50"
    ],
    "master_extruder_id": "2",
    "nozzle_volume": [
        "130",
        "133",
        "145",
        "148"
    ],
    "printable_area": [
        "0x0",
        "330x0",
        "330x320",
        "0x320"
    ],
    "retract_lift_below": [
        "319",
        "319",
        "319",
        "319"
    ],
    "retraction_distances_when_cut": [
        "14",
        "14",
        "14",
        "14"
    ],
    "support_chamber_temp_control": "1",
    "support_cooling_filter": "1",
    "unprintable_filament_types": [
        "TPU",
        "PPS-CF,PPA-CF"
    ],
    "wrapping_exclude_area": [
        "145x310",
        "251x310",
        "251x326",
        "145x326"
    ],
    "upward_compatible_machine": [
        "Bambu Lab H2S 0.4 nozzle",
        "Bambu Lab H2D 0.4 nozzle",
        "Bambu Lab H2D Pro 0.4 nozzle"
    ]
}