{
    "name": "Bambu Lab A1 mini 0.4 nozzle template time_lapse_gcode",
    "instantiation": "false",
    "time_lapse_gcode": ";===================== date: 20250206 =====================\n{if !spiral_mode && print_sequence != \"by object\"}\n; don't support timelapse gcode in spiral_mode and by object sequence for I3 structure printer\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\nG92 E0\nG1 Z{max_layer_z + 0.4}\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\nM400\nM1004 S5 P1  ; external shutter\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 X0 F18000\nM623\n\n; SKIPTYPE: head_wrap_detect\nM622.1 S1\nM1002 judge_flag g39_3rd_layer_detect_flag\nM622 J1\n    ; enable nozzle clog detect at 3rd layer\n    {if layer_num == 2}\n      M400\n      G90\n      M83\n      M204 S5000\n      G0 Z2 F4000\n      G0 X187 Y178 F20000\n      G39 S1 X187 Y178\n      G0 Z2 F4000\n    {endif}\n\n\n    M622.1 S1\n    M1002 judge_flag g39_detection_flag\n    M622 J1\n      {if !in_head_wrap_detect_zone}\n        M622.1 S0\n        M1002 judge_flag g39_mass_exceed_flag\n        M622 J1\n        {if layer_num > 2}\n            G392 S0\n            M400\n            G90\n            M83\n            M204 S5000\n            G0 Z{max_layer_z + 0.4} F4000\n            G39.3 S1\n            G0 Z{max_layer_z + 0.4} F4000\n            G392 S0\n          {endif}\n        M623\n    {endif}\n    M623\nM623\n; SKIPPABLE_END\n{endif}\n\n\n"
}