{
    "type": "machine",
    "name": "Bambu Lab A1 0.4 nozzle",
    "inherits": "fdm_bbl_3dp_001_common",
    "from": "system",
    "setting_id": "GM030",
    "instantiation": "true",
    "nozzle_diameter": [
        "0.4"
    ],
    "printer_model": "Bambu Lab A1",
    "printer_variant": "0.4",
    "auxiliary_fan": "0",
    "bed_exclude_area": [],
    "default_filament_profile": [
        "Bambu PLA Basic @BBL A1"
    ],
    "default_print_profile": "0.20mm Standard @BBL A1",
    "enable_long_retraction_when_cut": "2",
    "extruder_clearance_dist_to_rod": "56.5",
    "extruder_clearance_height_to_lid": "256",
    "extruder_clearance_height_to_rod": "25",
    "extruder_clearance_max_radius": "73",
    "grab_length": [
        "17.4"
    ],
    "head_wrap_detect_zone": [
        "226x224",
        "256x224",
        "256x256",
        "226x256"
    ],
    "include": [
        "Bambu Lab A1 0.4 nozzle template machine_start_gcode",
        "Bambu Lab A1 0.4 nozzle template machine_end_gcode",
        "Bambu Lab A1 0.4 nozzle template time_lapse_gcode",
        "Bambu Lab A1 0.4 nozzle template change_filament_gcode",
        "Bambu Lab A1 0.4 nozzle template layer_change_gcode"
    ],
    "machine_load_filament_time": "25",
    "machine_max_acceleration_extruding": [
        "12000",
        "12000"
    ],
    "machine_max_acceleration_x": [
        "12000",
        "12000"
    ],
    "machine_max_acceleration_y": [
        "12000",
        "12000"
    ],
    "machine_max_acceleration_z": [
        "1500",
        "1500"
    ],
    "machine_max_jerk_e": [
        "3",
        "3"
    ],
    "machine_max_speed_z": [
        "30",
        "30"
    ],
    "nozzle_height": "4.76",
    "nozzle_type": [
        "stainless_steel"
    ],
    "nozzle_volume": [
        "92"
    ],
    "printable_height": "256",
    "printer_structure": "i3",
    "retract_lift_below": [
        "255"
    ],
    "upward_compatible_machine": [
        "Bambu Lab H2D 0.4 nozzle",
        "Bambu Lab H2D Pro 0.4 nozzle",
        "Bambu Lab H2S 0.4 nozzle",
        "Bambu Lab P2S 0.4 nozzle",
        "Bambu Lab H2C 0.4 nozzle"
    ]
}