{
    "type": "filament",
    "name": "Bambu PLA Translucent @BBL H2S",
    "inherits": "Bambu PLA Translucent @base",
    "from": "system",
    "setting_id": "GFSA17_15",
    "instantiation": "true",
    "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.",
    "additional_cooling_fan_speed": [
        "75"
    ],
    "eng_plate_temp": [
        "55"
    ],
    "eng_plate_temp_initial_layer": [
        "60"
    ],
    "filament_flow_ratio": [
        "0.98",
        "0.98"
    ],
    "filament_max_volumetric_speed": [
        "12",
        "12"
    ],
    "filament_retraction_length": [
        "0.4",
        "0.4"
    ],
    "filament_wipe": [
        "1",
        "1"
    ],
    "filament_wipe_distance": [
        "1",
        "1"
    ],
    "filament_z_hop_types": [
        "Spiral Lift",
        "Spiral Lift"
    ],
    "filament_ramming_travel_time": [
        "0",
        "0"
    ],
    "filament_prime_volume": [
        "30"
    ],
    "filament_change_length": [
        "4"
    ],
    "include": [
        "fdm_filament_template_direct_dual"
    ],
    "long_retractions_when_ec": [
        "0",
        "0"
    ],
    "nozzle_temperature_range_low": [
        "200"
    ],
    "nozzle_temperature": [
        "220",
        "220"
    ],
    "nozzle_temperature_initial_layer": [
        "220",
        "220"
    ],
    "pre_start_fan_time": [
        "2"
    ],
    "retraction_distances_when_ec": [
        "0",
        "0"
    ],
    "supertack_plate_temp": [
        "40"
    ],
    "supertack_plate_temp_initial_layer": [
        "40"
    ],
    "slow_down_min_speed": [
        "20",
        "20"
    ],
    "textured_plate_temp_initial_layer": [
        "60"
    ],
    "compatible_printers": [
        "Bambu Lab H2S 0.4 nozzle",
        "Bambu Lab H2S 0.6 nozzle",
        "Bambu Lab H2S 0.8 nozzle"
    ],
    "filament_start_gcode": [
        "; filament start gcode\n"
    ],
    "filament_end_gcode": [
        "; filament end gcode \n"
    ]
}