What it is
ESP32 WiFi scanner - signal graphs, device tracking.
Version history
Straight from the project’s own card data — what each version added.
Serial only.
MAC tracking.
Full dashboard.
By the numbers
Measured from the real working folder ~/Documents/projects/network-tools/wifi-monitor — not a claim, a count.
Mostly: C++ ×1
What broke, and what I’d change
Not written yet. This is the part only I can write — what actually went wrong, and what I’d do differently. It lives in builds/reflections/wifi-monitor.md (see _TEMPLATE.md); as soon as that file has words in it, this section fills in on the next build.
Everything else on this page — the spec, the version history, the file counts — is generated from the project’s own build notes and files, so nothing here is guesswork.
Build spec
The project’s own build notes, rendered. Open the raw .md ↗
Show the spec
WiFi Monitor
Category: Software & Apps · Status: Done
ESP32 WiFi scanner - signal graphs, device tracking.
Stack / Tools: ESP32, WiFi, Scanner, C
Build path:
- V1 — Serial only.
- V2 — MAC tracking.
- V3 — Full dashboard.
Location: ~/projects/wifi-monitor/
Full spec already in this prompt file (ESP32-C3 AP-mode WiFi scanner with web dashboard).
Where it lives
- Source folder:
~/Documents/projects/network-tools/wifi-monitor - Artefacts on the site: 2 files · 105 lines of text · 5 KB
Stack
- .ini ×1 · C++ ×1 · PlatformIO
What's in the code
src/main.cpp— 105 lines (C++)
_Spec generated from the project's own files on 2026-10-22 (gen-project-specs.py). Everything above was read from the listed files — file counts, line counts, names, routes, headings and script comments. No description was invented._