Build log · Software & apps

CNC Drill Box

Software & appsdone3 versionsCNCStorageMan CheukSTL
📄 Raw spec (.md)📁 Portfolio

reflection not written yet · every fact below is generated from this project’s own spec and files

What it is

CNC drill bit storage box (v1–v3). By Man Cheuk (Ronin).

Version history

Straight from the project’s own card data — what each version added.

V1

Initial design.

V2

Refined fit.

V3

Smooth variant with easy-slide lid.

Files on the site

By the numbers

Measured from the real working folder ~/Documents/projects/drafts/cnc-drill-box — not a claim, a count.

11
files
0
lines of code
1
file types used
2026-05-13
oldest file
2026-06-10
last touched

Mostly: binary assets ×11

What broke, and what I’d change

Not written yet. This is the part only I can write — what actually went wrong, and what I’d do differently. It lives in builds/reflections/cnc-drill-box.md (see _TEMPLATE.md); as soon as that file has words in it, this section fills in on the next build.

Everything else on this page — the spec, the version history, the file counts — is generated from the project’s own build notes and files, so nothing here is guesswork.

Build spec

The project’s own build notes, rendered. Open the raw .md ↗

Show the spec

CNC Drill Box

Category: Software & Apps · Status: Draft

CNC drill bit storage box (v1–v3).

Stack / Tools: CNC, Storage, Draft

Location: ~/cnc-drill-box

Where it lives

  • Source folder: ~/Documents/projects/drafts/cnc-drill-box
  • Source folder: ~/Documents/cnc drill box
  • Artefacts on the site: 27 files · no text source (compiled/asset only) · 18.6 MB

Stack

  • STL model ×14 · Fusion 360 design ×11 · 3MF model ×1 · .DS_Store ×1

What's in the code

  • v1/cnc mill tool head box.f3d — 1.9 MB (Fusion 360 design, binary — not line-counted)
  • smooth/v1/Box_Lid_3.175mm_Shank.3mf — 181 KB (3MF model, binary — not line-counted)
  • smooth/v1/Clear_Box (Easy slide).stl — 253 KB (STL model, binary — not line-counted)
  • smooth/v1/Box_Lid_3.175mm_Shank.stl — 324 KB (STL model, binary — not line-counted)
  • smooth/v1/Box_Lid_4mm_Shank.stl — 279 KB (STL model, binary — not line-counted)
  • smooth/v1/cnc mill tool head box.f3d — 2.1 MB (Fusion 360 design, binary — not line-counted)
  • v2/cnc mill tool head box (1).f3d — 1.9 MB (Fusion 360 design, binary — not line-counted)
  • v3/Clear_Box.stl — 144 KB (STL model, binary — not line-counted)
  • v3/Box_Lid_3.175mm_Shank.stl — 324 KB (STL model, binary — not line-counted)
  • v3/Box_Lid_4mm_Shank.stl — 279 KB (STL model, binary — not line-counted)
  • v3/cnc mill tool head box.f3d — 1.8 MB (Fusion 360 design, binary — not line-counted)
  • ../../../cnc drill box/v1/._cnc mill tool head box.f3d — 4 KB (Fusion 360 design, binary — not line-counted)

_Spec generated from the project's own files on 2026-10-22 (gen-project-specs.py). Everything above was read from the listed files — file counts, line counts, names, routes, headings and script comments. No description was invented._